Mitered Fittings,Marine Pe100 Plastic Pipe,Marine Pe100 Plastic Pipe For Accommodation,Marine Pe100 Plastic Pipe For Water Supply Jingjiang Haihong Plastic & Rubeer Science -Technology Co.,Ltd , https://www.marineplasticpipe.com
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobileÂ
wires, telecommunication wires, and other kinds of copper wires, in order to recoverÂ
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..
cable wire recycling machine  Main Features:Â
1.  No water needed, just put cable wires into the plantÂ
2.  Turnkey and compact type, PLC controller,Â
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires
Final Copper&plastic granules output:
copper cable granulator Working Process:Â
copper cable granulator Technical Parameters:Â
ModelÂ
Processing
capacity
Processed wire dia.
Total power
Voltage
DimensionÂ
WeightÂ
FC-400-1
80-120kg/h
0.3-20mm
11.92KW
customized
1.5*1.5*1.9m
750kg
FC-400
200-250kg/h
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400kg/h
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400kg/h
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800kg/h
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200kg/h
129.6KW
16*10*3m
12000kg
Different Models of scrap wire shredder: 
Contact us freely for more detailed quotation.Â
Â
copper cable granulator General IntroductionÂ
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobileÂ
wires, telecommunication wires, and other kinds of copper wires, in order to recoverÂ
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..
cable wire recycling machine  Main Features:Â
1.  No water needed, just put cable wires into the plantÂ
2.  Turnkey and compact type, PLC controller,Â
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires
Final Copper&plastic granules output:
copper cable granulator Working Process:Â
copper cable granulator Technical Parameters:Â
ModelÂ
Processing
capacity
Processed wire dia.
Total power
Voltage
DimensionÂ
WeightÂ
FC-400-1
80-120kg/h
0.3-20mm
11.92KW
customized
1.5*1.5*1.9m
750kg
FC-400
200-250kg/h
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400kg/h
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400kg/h
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800kg/h
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200kg/h
129.6KW
16*10*3m
12000kg
Different Models of scrap wire shredder:Â
Contact us freely for more detailed quotation.Â
Â
High Efficiency Waste Copper Wires Cables Recycling Machine
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
copper cable granulator General Introduction 1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.